Sliding door for chambers with controlled gas environment RGS series

Installed as part of sealed chambers for storing fruits and vegetables in a controlled gas environment. The use of a specialized seal and eccentric valves in the design ensures reliable tightness. The aluminum frame and edging of the canvas guarantee reliable operation of the structure in conditions of high humidity. Installing a viewing window makes it easier to monitor the quality of stored products.

Application:

Fruit and vegetable storage

Order with installation

Advantages

One hundred percent tightness of the door allows you to maintain higher pressure inside the room.

Aluminum, used for the manufacture of the frame and frame of the canvas, guarantees increased corrosion resistance of the structure.

Installation of eccentric mechanisms ensures reliable locking of doors.

The lightweight and durable aluminum frame ensures ease of installation.

A hatch with an inspection window makes it possible to monitor the condition of stored products.

One hundred percent tightness of the door allows you to maintain higher pressure inside the room.

Aluminum, used for the manufacture of the frame and frame of the canvas, guarantees increased corrosion resistance of the structure.

Installation of eccentric mechanisms ensures reliable locking of doors.

The lightweight and durable aluminum frame ensures ease of installation.

A hatch with an inspection window makes it possible to monitor the condition of stored products.

Design

Surface of sandwich panels

Colors

Smooth

RAL 9003 white (canvas)

RAL 9006 silver (leaf edge)

Equipment

Standard

Optional

Recoil system.

Aluminum frame.

Door leaf.

Upper roller bearing kit.

Lever handle.

Eccentric mechanisms.

Recessed threshold.

Protective decorative box.

Protective bumper.

Window.

Gas tap.

Inner frame.

Technical description

Size Table

Opening Dimensions

Construction

Standard Construction

Specifications

Operating Conditions

Packaging

Parameters

Value

Opening width, mm

1 600–3 000

Opening height, mm

1 800–3 500

Insulation thickness, mm

Sandwich panels
Window
Eccentric mechanisms
Aluminum frame
Aluminum edging profiles
Handle
Top guide
Gas tap
Bottom seal
Recessed threshold
Bottom guide
Bottom roller

Opening to the left.

Recoil system.

Parameter	Value	Notes
Filling thickness, mm	80
Number of cycles	270 000

To ensure reliable and uninterrupted operation of sliding doors, it is recommended that they be regularly inspected and maintained.

Manual opening and closing of doors should only be done using the handle.

Do not subject the doors to impacts or prevent them from opening and closing freely.

Make sure that there are no foreign objects in the opening when opening and closing the doors.

It is prohibited to stand in the opening while opening and closing doors to avoid injury.

Packing in wood	Packaging features
Height, mm	700
Length, mm	Depends on the height of the door leaf
Width, mm	Depends on the width of the door leaf

Additional Information print

Sliding doors for chambers with a controlled gas environment have a high degree of maintainability. If any structural element fails, it can be replaced as soon as possible.

Installation

Mounting Options

Checking Dimensional Details

Indoor installation.

Installation on the building facade.

All measurements are taken indoors. Each value must be measured at least at three different points to avoid inaccuracies.
H is the height of the opening (distance from the floor to the top of the opening).
B — opening width (distance from the left edge to the right edge of the opening).
h1 — lintel (distance from the top of the opening to the obstacle).
b1/b2 — left/right lateral distance (distance from the corresponding edge of the opening to the obstacle).
When measuring H and B (height and width of the opening), the largest value is taken as the final size; when measuring h1, b1, b2, the smallest. The discrepancy between the wall levels can be no more than 3 mm, the discrepancy between the diagonals of the opening — no more than 5 mm.

Warranty print

The buyer is provided with a performance guarantee for refrigerated doors produced by the DoorHan concern for a period of 1 year for retail orders and for a period of 2 years for dealer orders from the date of purchase.

New Products

The sealing system around the perimeter of the canvas provides a better fit.

Adjustable window fastening hinges.

Design

Surface of sandwich panels

Smooth

Colors

RAL 9003 white (canvas)

RAL 9006 silver (leaf edge)

Equipment

Standard

Recoil system.

Aluminum frame.

Door leaf.

Upper roller bearing kit.

Lever handle.

Eccentric mechanisms.

Recessed threshold.

Optional

Protective decorative box.

Protective bumper.

Window.

Gas tap.

Inner frame.

Technical description

Size Table

Parameters

Value

Opening width, mm

1 600–3 000

Opening height, mm

1 800–3 500

Insulation thickness, mm

Construction

Sandwich panels
Window
Eccentric mechanisms
Aluminum frame
Aluminum edging profiles
Handle
Top guide
Gas tap
Bottom seal
Recessed threshold
Bottom guide
Bottom roller

Standard Construction

Opening to the left.

Recoil system.

Specifications

Parameter	Value	Notes
Filling thickness, mm	80
Number of cycles	270 000

Operating Conditions

To ensure reliable and uninterrupted operation of sliding doors, it is recommended that they be regularly inspected and maintained.

Manual opening and closing of doors should only be done using the handle.

Do not subject the doors to impacts or prevent them from opening and closing freely.

Make sure that there are no foreign objects in the opening when opening and closing the doors.

It is prohibited to stand in the opening while opening and closing doors to avoid injury.

Packaging

Packing in wood	Packaging features
Height, mm	700
Length, mm	Depends on the height of the door leaf
Width, mm	Depends on the width of the door leaf

Additional Information

Sliding doors for chambers with a controlled gas environment have a high degree of maintainability. If any structural element fails, it can be replaced as soon as possible.

Installation

Mounting Options

Indoor installation.

Installation on the building facade.

Checking Dimensional Details

All measurements are taken indoors. Each value must be measured at least at three different points to avoid inaccuracies.
H is the height of the opening (distance from the floor to the top of the opening).
B — opening width (distance from the left edge to the right edge of the opening).
h1 — lintel (distance from the top of the opening to the obstacle).
b1/b2 — left/right lateral distance (distance from the corresponding edge of the opening to the obstacle).
When measuring H and B (height and width of the opening), the largest value is taken as the final size; when measuring h1, b1, b2, the smallest. The discrepancy between the wall levels can be no more than 3 mm, the discrepancy between the diagonals of the opening — no more than 5 mm.

Warranty

Checkout

Managers of the company will answer all
questions by phone:

+9 71 4 382 90 00

CALL BACK