High-speed folding gates SPEEDFOLD SDFS series

High-speed folding gates of the SPEEDFOLD SDFS series are designed for installation on internal and external openings of premises with increased wind load in industrial, warehouse and other facilities.

Application:

Warehouse complexes. Industrial facilities.

Order with installation

Design

Surface Type

Frame colors

Gate frame made of unpainted galvanized steel

RAL 9010 Pure white

RAL 5002 Ultramarine blue

RAL 6026 Opal green

RAL 9006 White aluminium

RAL 1003 Signal yellow

RAL 3002 Carmine red

RAL 2004 Pure orange

Equipment

Standard

Zinc-coated shaft

Door curtain

Control box

Photoelectric cells

Technical description

Size Table

Construction

Standard Construction

Specifications

Operating Conditions

Packaging

Parameters

Value

Opening width, mm

1,800–5,000 (production of gates with a width of more than 5,000 mm is possible upon individual request)

Opening height, mm

1,800–5,000 (production of gates with a height of more than 5,000 mm is possible upon individual request)

Headroom, mm

From 1,000

Sideroom clearance, mm

From 250

Drive
Shaft box
Canvas
Belt
Transparent insert (window/panel)
Vertical guide
Bottom edge of the canvas

Parameter	Value	Notes
Wind load, Pa	CLASS3 (up to 120)	For gates up to 5,000 mm wide
Wind load, Pa	CLASS4	For gates up to 3,000 mm wide
Opening speed, m/s	Up to 1.0	For gates up to 5,000 x 5,000 mm (depending on area)
Closing speed, m/s	Up to 0.5	Depends on area
Operating temperature range, °С	-5…+50	If the drive is installed outside the building
Operating temperature range, °С	-15…+50	If the drive is installed inside a building
Operating temperature range, °С	-30…+50	When using the drive heating system
Power, W	1,500
IP protection class	IP54	End positions are tracked by encoder
Supply voltage, V	220 V / 50 Hz	Single phase
Number of cycles	1,000,000	Depends on operating conditions

1. To ensure reliable and uninterrupted operation of the gate, it is recommended to carry out regular technical inspection and maintenance.

2. Do not subject the gate to impacts or interfere with its free opening and closing.

3. Do not allow the PVC sheet guide to get dirty.

4. It is prohibited to stand in the opening while opening and closing the gate to avoid injury.

5. Make sure that there are no foreign objects in the opening when opening and closing the gate.

Packing in wood	Packaging features
Contents	The packaging is a wooden box made of timber, cardboard is laid between the nodes, everything is secured with clamps
Length, mm	Depends on the length of the gate components
Width, mm	640–705
Height, mm	480–730

Additional Information print

The DoorHan concern loads gates onto trucks using a hydraulic crane or forklift with a fork of at least 2 m. The buyer or installer must provide the same equipment for moving the packaged gates. The plug should fit under the wooden pallet provided by the manufacturer and protrude from the other side. When using a crane or other lifting equipment, it is recommended that you use slings of adequate lifting capacity.

Installation

Mounting Options

Checking Dimensional Details

Overhead installation of high-speed gates.

All measurements are taken indoors. Each value must be measured at at least three points (in extreme positions and in the center).
H – opening height (distance from the floor to the top of the opening).
B – opening width (distance from the left edge to the right edge of the opening).
h – lintel (distance from the top of the opening to the ceiling).
b1/b2 – left/right lateral distance (distance from the corresponding edge of the opening to the obstacle).
When measuring H and B, the largest value is taken as the final size; when measuring h, b1 and b2, the smallest value is taken. For gates of the SDFB series, preparation of the opening requires individual calculation.

Warranty print

The buyer is provided with a performance guarantee for high-speed folding gates produced by the DoorHan concern for a period of 1 year for retail and for a period of 2 years for dealer orders from the date of purchase.

New Products

DoorHan SERVO drive (220 V).