SpeedFold SDF high-speed folding doors are designed for industrial, warehouse, commercial and other applications. Being resistant to high wind pressure these doors ideally isolate and preserve temperature in premises.
Application:
- Warehouses and logistics centers. Industrial facilities
Design
Surface Type
Door frame/curtain colour
Stainless steel door frame
RAL 5002 Ultramarine blue
Technical description
Size Table
Construction
Standard Construction
Specifications
Operating Conditions
Packaging
Opening width, mm
from 2 000 to 3 700
Opening height, mm
from 2 000 to 3 700
Sideroom clearance, mm
130
- Electric drive
- Shaft box
- Door curtain
- Belt
- Transparent insert (window/panel)
- Vertical track
- Curtain bottom edge
| Parameter |
Value |
Notes |
|
Wind load, Pa |
CLASS3 |
for doors up to 5 000 mm wide |
|
Wind load, Pa |
CLASS4 |
for doors up to 3 000 mm wide |
|
Opening speed, m/s |
1.0 |
for doors up to 5 000 × 5 000 mm |
|
Closing speed, m/s |
0.5 |
|
|
Operating temperature range, °С |
from -5 to +70 |
if the drive is installed outside the premise |
|
Operating temperature range, °С |
from -15 to +70 |
if the drive is installed inside the premise |
|
Operating temperature range, °С |
from -35 to +70 |
with the heating system for tracks and drive |
|
Power, W |
1,500 |
|
|
IP protection class |
IP54 |
end positions are monitored by the encoder |
|
Supply voltage, V |
220 V / 50 Hz |
single-phase |
|
Supply voltage, V |
380 V / 50 Hz |
triphase |
|
Number of cycles |
1,000,000 |
depends on operating conditions |
Carry out regular maintenance of high-speed doors to provide their smooth and safe operation.
Manual closing and opening of the doors is carried out with a hand crank.
Don’t strike the door curtain or obstruct its movement.
Keep the rails clean.
Never stay or cross an opening under a moving door curtain as it may cause serious injury.
Keep the door opening clear of any objects during door closing or opening.
| Packing in wood |
Packaging features |
| Contents |
wooden crate, door parts are protected with cardboard and fixed with clamps |
| Length, mm |
depends on door parts length |
| Width, mm |
from 640 to 705 |
| Height, mm |
from 480 to 730 |
Additional Information print
All the DoorHan products are loaded with hydraulic crane or fork-lift truck with 2 m long forks. Customer or installer is recommended to use similar equipment. Truck fork should go under the wooden pallet, provided by the customer, and protrude from its other side. When lifting with crane or other lifting equipment use slings of corresponding lifting capacity.
Installation
Mounting Options
Checking Dimensional Details
- All the necessary measurements are taken inside the premises. Every dimension should be taken at least in three points.
- H – opening height (distance from floor to opening top).
- W – opening width (distance between left and right side of the opening).
- When measuring Н and W the largest figure is taken for final dimension.
Warranty print
DoorHan warrants the high-speed doors to operate properly for a period of 1 year from purchase date for retail orders, and for a period of 2 years from purchase date for dealer orders.
New Products
DoorHan drive (220/380 V)
Design
Surface Type
Stainless steel door frame
Door frame/curtain colour
RAL 5002 Ultramarine blue
Technical description
Size Table
Opening width, mm
from 2 000 to 3 700
Opening height, mm
from 2 000 to 3 700
Sideroom clearance, mm
130
Construction
- Electric drive
- Shaft box
- Door curtain
- Belt
- Transparent insert (window/panel)
- Vertical track
- Curtain bottom edge
Specifications
| Parameter |
Value |
Notes |
|
Wind load, Pa |
CLASS3 |
for doors up to 5 000 mm wide |
|
Wind load, Pa |
CLASS4 |
for doors up to 3 000 mm wide |
|
Opening speed, m/s |
1.0 |
for doors up to 5 000 × 5 000 mm |
|
Closing speed, m/s |
0.5 |
|
|
Operating temperature range, °С |
from -5 to +70 |
if the drive is installed outside the premise |
|
Operating temperature range, °С |
from -15 to +70 |
if the drive is installed inside the premise |
|
Operating temperature range, °С |
from -35 to +70 |
with the heating system for tracks and drive |
|
Power, W |
1,500 |
|
|
IP protection class |
IP54 |
end positions are monitored by the encoder |
|
Supply voltage, V |
220 V / 50 Hz |
single-phase |
|
Supply voltage, V |
380 V / 50 Hz |
triphase |
|
Number of cycles |
1,000,000 |
depends on operating conditions |
Operating Conditions
Carry out regular maintenance of high-speed doors to provide their smooth and safe operation.
Manual closing and opening of the doors is carried out with a hand crank.
Don’t strike the door curtain or obstruct its movement.
Keep the rails clean.
Never stay or cross an opening under a moving door curtain as it may cause serious injury.
Keep the door opening clear of any objects during door closing or opening.
Packaging
| Packing in wood |
Packaging features |
| Contents |
wooden crate, door parts are protected with cardboard and fixed with clamps |
| Length, mm |
depends on door parts length |
| Width, mm |
from 640 to 705 |
| Height, mm |
from 480 to 730 |
Additional Information
All the DoorHan products are loaded with hydraulic crane or fork-lift truck with 2 m long forks. Customer or installer is recommended to use similar equipment. Truck fork should go under the wooden pallet, provided by the customer, and protrude from its other side. When lifting with crane or other lifting equipment use slings of corresponding lifting capacity.
Installation
Checking Dimensional Details
- All the necessary measurements are taken inside the premises. Every dimension should be taken at least in three points.
- H – opening height (distance from floor to opening top).
- W – opening width (distance between left and right side of the opening).
- When measuring Н and W the largest figure is taken for final dimension.
Warranty
DoorHan warrants the high-speed doors to operate properly for a period of 1 year from purchase date for retail orders, and for a period of 2 years from purchase date for dealer orders.
Checkout
Managers of the company will answer all
questions by phone:
