Reloading vestibule of the standard DHOUS series

Thanks to its design, the standard DHOUS series loading dock can be used with all types of docking docks and dock levelers with rotary and retractable lip. Installation is carried out using surface mounting, the speed of which is achieved through the supply of pre-assembled units. All connections of the structure are welded.

Application:

Warehouses and logistics centres

Order with installation

Advantages

Installation outside the building ensures the preservation of the temperature regime and saves space inside the premises.

It can be used with all types of shelters and leveling platforms with a rotary or a retractable lip.

The design of the roof of the vestibule ensures the removal of precipitation from the shelter and the truck.

Possibility of modernization without rebuilding the main building.

Installation outside the building ensures the preservation of the temperature regime and saves space inside the premises.

It can be used with all types of shelters and leveling platforms with a rotary or a retractable lip.

The design of the roof of the vestibule ensures the removal of precipitation from the shelter and the truck.

Possibility of modernization without rebuilding the main building.

Design

Dock framing and structure. Standard colours

Walls. Standard colours

RAL 5005 Signal blue

RAL 9005 Jet black

RAL 9003 Signal white

RAL 5005 Signal blue

RAL 7004 Signal grey

RAL 3000 Flame red

Equipment

Standard

Optional

Walls — sandwich panel (interior/exterior colour – RAL 9003); roof — С44 profiled sheeting (zinc-plated)

Steel plate used when building plinth is 0 mm (building plinth is flush with building wall)

Pre-drilled holes for installation of any chosen bumper

Without roof and walls

Steel angle used when building plinth is 1—500 mm (building plinth projects for 1–500 mm)

Insulation of the roof with sandwich panels

Walls — С20 profiled sheeting. 4 standard colours: RAL 9003 (signal white), RAL 5005 (signal blue), RAL 7004 (signal grey), RAL 3000 (flame red)

Walls — any profiled sheeting. Colour according customer’s request

Flashings used to cover the junction between a dock house and a warehouse wall

Molded rubber bumpers 250х250х100 mm. Standard. Product number BR250x250x100. Ensure safe truck reversing into the loading dock, protect the building walls. For mounting dimensions, please, refer to drawings

Molded rubber bumpers 450x250x100 mm. Standard. Product number BR450x250x100. Ensure safe truck reversing into the loading dock, protect the building walls. For mounting dimensions, please, refer to drawings

Molded rubber bumpers 510х250х330 mm (external dimensions), console type. Based on rubber bumper 450x250x100 mm. Product number BRC510х250х330. Ensure safe truck reversing into the loading dock, protect the building walls. Used when truck load bed is higher than the ramp. For mounting dimensions, please, refer to drawings

Molded rubber bumpers 610х250х175. (external dimensions), moving. Based on rubber bumper 450x250x100 mm. Product number BRM610х250х175. Move up and down following vehicle raising and lowering as the suspension floats during the loading/unloading cycle. Has greater service life. For mounting dimensions, please, refer to drawings

Molded rubber bumpers 600х364х110 mm (external dimensions), adjustable. Based on rubber bumper 450x250x100 mm. Product number BRM600х364х110. Move up and down following vehicle raising and lowering as the suspension floats during the loading/unloading cycle. Has greater service life. Can be used only with dock levelers with 1 000 mm telescopic lip. For mounting dimensions, please, refer to drawings

Steel face dock bumpers 465х250х165 mm (external dimensions) with 16 mm steel plate. Based on rubber bumper 450x250x100 mm. Product number BRSP(16)465х250х165. Consist of a rubber bumper 450x250x100 mm covered with durable steel plate. Steel face improves life expectancy of the rubber bumper and protects it from damaging by parking vehicle and during loading/unloading cycle. Manufacturer’s warranty doesn’t cover steel plate replacement in case of wear and deformation due to its extreme abnormal wear. For mounting dimensions, please, refer to drawings

Steel face dock bumpers 465х250х165 mm (external dimensions) with 16 mm steel plate and parking sensor. Based on rubber bumper 450x250x100 mm. Product number BRSP(16)465х250х165S. Consists of a rubber bumper 450x250x100 mm covered with durable steel plate and parking sensor. Steel face improves life expectancy of the rubber bumper and protects it from damaging by parking vehicle and during loading/unloading cycle. Manufacturer’s warranty doesn’t cover steel plate replacement in case of wear and deformation due to its extreme abnormal wear. This dock bumper is used together with parking radar. For mounting dimensions, please, refer to drawings

Steel face dock bumpers 500х255х205 (external dimensions) with damper insert. Based on rubber bumper 450x250x100 mm. Product number BS500х255х205. It’s a hybrid device combining moving bumper and steel plate bumper. Consists of a holder, a rubber crumb damper insert and a moving steel plate following truck bed movement. Steel face improves life expectancy of the rubber bumper and protects it from damaging by parking vehicle and during loading/unloading cycle. Manufacturer’s warranty doesn’t cover steel plate replacement in case of wear and deformation due to its extreme abnormal wear. Can be used only with dock leveler with 1 000 mm telescopic lip For mounting dimensions, please, refer to drawings

Steel face dock bumper 800х255х205 (external dimensions) with damper insert. Based on rubber bumper 450x250x100 mm. Product number BS800х255х205. It’s a hybrid device combining moving bumper and steel plate bumper. Consists of a holder, a rubber crumb damper insert and a moving steel plate following truck bed movement. Steel face improves life expectancy of the rubber bumper and protects it from damaging by parking vehicle and during loading/unloading cycle. Manufacturer’s warranty doesn’t cover steel plate replacement in case of wear and deformation due to its extreme abnormal wear. Can be used only with dock leveler with 1 000 mm telescopic lip For mounting dimensions, please, refer to drawings

LED dock light

Technical description

Size Table

Construction

Standard Construction

Specifications

Operating Conditions

Packaging

Parameters

Value

Width, m

2 800–3 600

Height, m

3 700–6 600

Length, m

2 030–7 648

Wall
Supports
Roof
Frame

DHOUS 90 series. Standard straight dock house (90°) for an embedded type dock leveler with hinged or telescopic lip.

Symbol, parameter name	Calculation formula
Hd, mm Shelter width	2 800–3 600
Bd, mm Shelter height	2 800–4 900
Hf, mm Ramp height	900–1 400 (1 200 as standard)
Lh, mm Leveler length (overall)	any
Bh, mm Leveler width (overall)	any
Hh, mm Leveler height	any
A°, Angle	90

DHOUS 60 series. Standard angled dock house (60°) for an embedded type dock leveler with hinged or telescopic lip.

Symbol, parameter name	Calculation formula
Hd, mm Shelter width	2 800–3 600
Bd, mm Shelter height	2 800–4 900
Hf, mm Ramp height	900–1 400 (1 200 as standard)
Lh, mm Leveler length (overall)	any
Bh, mm Leveler width (overall)	any
Hh, mm Leveler height	fny
A°, Angle	60; turned to the right or to the left (view from the building)

DHOUS 45 series. Standard angled dock house (45°) for an embedded type dock leveler with hinged or telescopic lip.

Symbol, parameter name	Calculation formula
Hd, mm Shelter width	2 800–3 600
Bd, mm Shelter height	2 800–4 900
Hf, mm Ramp height	900–1 400 (1 200 as standard)
Lh, mm Leveler length (overall)	any
Bh, mm Leveler width (overall)	any
Hh, mm Leveler height	any
A°, Angle	45; turned to the right or to the left (view from the building)

DHOUS 30 series. Standard angled dock house (30°) for an embedded type dock leveler with hinged or telescopic lip.

Symbol, parameter name	Calculation formula
Hd, mm Shelter width	2 800–3 600
Bd, mm Shelter height	2 800–4 900
Hf, mm Ramp height	900–1 400 (1 200 as standard)
Lh, mm Leveler length (overall)	any
Bh, mm Leveler width (overall)	any
Hh, mm Leveler height	any
A°, Angle	30; turned to the right or to the left (view from the building)

Parameter	Value	Notes
Maximum height, mm	6 600
Maximum length, mm	7 648
Minimum height, mm	3 700
Minimum length, mm	2 030
Width, mm	2 800–3 600
Snow load, kg/m²	100
Colour	RAL 9005 (jet black), RAL 5005 (signal blue)	standard colours for dock framing and structure, other colour (optional)
Colour	RAL 9003 (signal white), RAL 5005 (signal blue), RAL 7004 (signal grey), RAL 3000 (flame red)	standard wall colours, other colours (optional)
Colour	RAL 7038 (agate grey)

Carry out technical inspection and maintenance of the dock house regularly to provide its safe and smooth operation.

In winter remove excess snow buildup from on top of the house, shelter and leveler. Clean the surrounding territory of the warehouse to ensure correct positioning of trailers.

Speed of a parking trailer should be minimum, not more than 1 km/h (30 sm/sec).

Do not drive over the house frame with forklifts and other lifting equipment. Drive only on the leveler deck and house triangle.

Attention! Check bumpers for signs of wear and tear regularly. Should bumper residual thickness comprise less than 50 mm or there is no bumper material at all stop using the dock house until new bumper material is installed.

Packing in cardboard	Packaging features
Length, mm	base (depends on leveler length) — 2 000–4 500; legs — 2 800–3 600; triangle — 2 800–3 600; frame — 6 536 (max); flashing — 2 500; walls — 5 962 (max); roof — 7 788 (max)
Width, mm	base — 785 (max); legs — 300; triangles — 3 400; frame — 500 (max); flashing — 200; walls — 2 400 (max); roof — 1 100
Height, mm	base — 800 (max); legs — 550 (max); triangles — 200; frame — 500 (max); flashing — 200; walls — 50; roof — 150 (max)
Contents	base, legs, triangles, frame, flashing, walls, roof, a box with hardware
Description	sandwich panel walls of the dock house are supplied disassembled. They are assembled during installation of the dock house

Additional Information print

All the DoorHan products are loaded with hydraulic crane or fork-lift truck with 2 m long forks. Customer or installer is recommended to use similar equipment. When lifting with crane or other lifting device use slings of corresponding lifting capacity.

Installation

Mounting Options

Mounting on steel embedded plates. This is a preferable type of installation including embedment of steel plates (400 х 400 mm) in particular places of a concrete base during preparation of installation site for a dock house. Mounting on concrete base (with anchor bolts). This type of installation is used when steel plates were not embedded during concrete base pouring.

Mounting on walls of different types (concrete, brick, metal, wooden, sandwich panels of 50 to 200 mm thickness).

Warranty print

DoorHan warrants the dock house to operate properly for a period of 1 year from purchase date for retail orders and for 2 years from purchase date for dealer orders.

Design

Dock framing and structure. Standard colours

RAL 5005 Signal blue

RAL 9005 Jet black

Walls. Standard colours

RAL 9003 Signal white

RAL 5005 Signal blue

RAL 7004 Signal grey

RAL 3000 Flame red

Equipment

Standard

Walls — sandwich panel (interior/exterior colour – RAL 9003); roof — С44 profiled sheeting (zinc-plated)

Steel plate used when building plinth is 0 mm (building plinth is flush with building wall)

Pre-drilled holes for installation of any chosen bumper

Optional

Without roof and walls

Steel angle used when building plinth is 1—500 mm (building plinth projects for 1–500 mm)

Insulation of the roof with sandwich panels

Walls — С20 profiled sheeting. 4 standard colours: RAL 9003 (signal white), RAL 5005 (signal blue), RAL 7004 (signal grey), RAL 3000 (flame red)

Walls — any profiled sheeting. Colour according customer’s request

Flashings used to cover the junction between a dock house and a warehouse wall

LED dock light

Technical description

Size Table

Parameters

Value

Width, m

2 800–3 600

Height, m

3 700–6 600

Length, m

2 030–7 648

Construction

Wall
Supports
Roof
Frame

Standard Construction

DHOUS 90 series. Standard straight dock house (90°) for an embedded type dock leveler with hinged or telescopic lip.

Symbol, parameter name	Calculation formula
Hd, mm Shelter width	2 800–3 600
Bd, mm Shelter height	2 800–4 900
Hf, mm Ramp height	900–1 400 (1 200 as standard)
Lh, mm Leveler length (overall)	any
Bh, mm Leveler width (overall)	any
Hh, mm Leveler height	any
A°, Angle	90

DHOUS 60 series. Standard angled dock house (60°) for an embedded type dock leveler with hinged or telescopic lip.

Symbol, parameter name	Calculation formula
Hd, mm Shelter width	2 800–3 600
Bd, mm Shelter height	2 800–4 900
Hf, mm Ramp height	900–1 400 (1 200 as standard)
Lh, mm Leveler length (overall)	any
Bh, mm Leveler width (overall)	any
Hh, mm Leveler height	fny
A°, Angle	60; turned to the right or to the left (view from the building)

DHOUS 45 series. Standard angled dock house (45°) for an embedded type dock leveler with hinged or telescopic lip.

Symbol, parameter name	Calculation formula
Hd, mm Shelter width	2 800–3 600
Bd, mm Shelter height	2 800–4 900
Hf, mm Ramp height	900–1 400 (1 200 as standard)
Lh, mm Leveler length (overall)	any
Bh, mm Leveler width (overall)	any
Hh, mm Leveler height	any
A°, Angle	45; turned to the right or to the left (view from the building)

DHOUS 30 series. Standard angled dock house (30°) for an embedded type dock leveler with hinged or telescopic lip.

Symbol, parameter name	Calculation formula
Hd, mm Shelter width	2 800–3 600
Bd, mm Shelter height	2 800–4 900
Hf, mm Ramp height	900–1 400 (1 200 as standard)
Lh, mm Leveler length (overall)	any
Bh, mm Leveler width (overall)	any
Hh, mm Leveler height	any
A°, Angle	30; turned to the right or to the left (view from the building)

Specifications

Parameter	Value	Notes
Maximum height, mm	6 600
Maximum length, mm	7 648
Minimum height, mm	3 700
Minimum length, mm	2 030
Width, mm	2 800–3 600
Snow load, kg/m²	100
Colour	RAL 9005 (jet black), RAL 5005 (signal blue)	standard colours for dock framing and structure, other colour (optional)
Colour	RAL 9003 (signal white), RAL 5005 (signal blue), RAL 7004 (signal grey), RAL 3000 (flame red)	standard wall colours, other colours (optional)
Colour	RAL 7038 (agate grey)

Operating Conditions

Carry out technical inspection and maintenance of the dock house regularly to provide its safe and smooth operation.

In winter remove excess snow buildup from on top of the house, shelter and leveler. Clean the surrounding territory of the warehouse to ensure correct positioning of trailers.

Speed of a parking trailer should be minimum, not more than 1 km/h (30 sm/sec).

Do not drive over the house frame with forklifts and other lifting equipment. Drive only on the leveler deck and house triangle.

Packaging

Packing in cardboard	Packaging features
Length, mm	base (depends on leveler length) — 2 000–4 500; legs — 2 800–3 600; triangle — 2 800–3 600; frame — 6 536 (max); flashing — 2 500; walls — 5 962 (max); roof — 7 788 (max)
Width, mm	base — 785 (max); legs — 300; triangles — 3 400; frame — 500 (max); flashing — 200; walls — 2 400 (max); roof — 1 100
Height, mm	base — 800 (max); legs — 550 (max); triangles — 200; frame — 500 (max); flashing — 200; walls — 50; roof — 150 (max)
Contents	base, legs, triangles, frame, flashing, walls, roof, a box with hardware
Description	sandwich panel walls of the dock house are supplied disassembled. They are assembled during installation of the dock house

Additional Information

Installation

Mounting Options

Mounting on walls of different types (concrete, brick, metal, wooden, sandwich panels of 50 to 200 mm thickness).

Warranty

DoorHan warrants the dock house to operate properly for a period of 1 year from purchase date for retail orders and for 2 years from purchase date for dealer orders.

Checkout

Managers of the company will answer all
questions by phone:

+9 71 4 382 90 00

CALL BACK