Industrial sectional doors made of aluminum panoramic panels with torsion mechanism ISD02

Panoramic sectional doors of the ISD02 series consist entirely or partially of panoramic panels, making them an ideal option for installation in buildings with glazed facades, for example, in car showrooms. The production of panoramic panels from aluminum profiles ensures their strength, and to increase the energy-saving and thermal insulation properties of the gate, it is recommended to combine panoramic and sandwich panels, as well as use T-bridge aluminum profiles, which are equipped with a polyamide thermal insert.

Application:

Automotive showrooms
Service stations
Fire stations

Order with installation

Advantages

The absence of a cold bridge in the sandwich panel, sealing along the entire contour due to seals, and leaf profiles with thermal separation guarantee maximum thermal efficiency of the door.

The glazing of panoramic panels, which has no analogues on the Russian market, can withstand blows with a hammer, crowbar, or stone.

The variety of types of gate lifts allows you to install them in rooms with any geometry of the internal space.

The gates are equipped with protection systems against cable breakage and spring breakage, which prevent the door leaf from falling in emergency situations.

A long service life and safety margin, a design that has been proven over the years ensure maximum reliability of the gate throughout its entire service life.

The absence of a cold bridge in the sandwich panel, sealing along the entire contour due to seals, and leaf profiles with thermal separation guarantee maximum thermal efficiency of the door.

The glazing of panoramic panels, which has no analogues on the Russian market, can withstand blows with a hammer, crowbar, or stone.

The variety of types of gate lifts allows you to install them in rooms with any geometry of the internal space.

The gates are equipped with protection systems against cable breakage and spring breakage, which prevent the door leaf from falling in emergency situations.

A long service life and safety margin, a design that has been proven over the years ensure maximum reliability of the gate throughout its entire service life.

Design

Panel Type

Surface Type

Full-vision panels

Door panel options

Colour Options

S-Line

D-Line

M-Line

V-Line

D-Line — Inside

Woodgrain (outside)

Stucco (inside)

Full-vision panel with T-bridge profiles (with thermal break)

Full-vision panel with double acrylic glass

Full-vision panel with single acrylic glass

Full-vision panel with aluminium perforated sheet

Standard glazing

Full-vision glazing

Combined full-vision and sandwich panels

RAL 9003 white (basic)

RAL 9006 silver (basic)

RAL 7004 gray (standard)

RAL 1014 beige (standard)

RAL 6005 green (standard)

RAL 5005 blue (standard)

RAL 7016 anthracite (standard)

RAL 3000 red (standard)

RAL 3005 burgundy (standard)

RAL 8017 brown-red (standard)

Non-standard color according to RAL card

Equipment

Standard

Optional

Full-vision door panel. Unbreakable, impact resistant polycarbonate is used as panel glazing. This is the only durable material introduced on the Russian market.

Side tracks and vertical angles made of 2 mm steel have increased strength and all the necessary perforation.

High-quality durable torsion springs designed for 25 000 closing cycles provide effortless closing and opening of the door.

Cable break safety device is used as bottom bracket. It stops door leaf from falling by fixing itself to the track in case of cable failure.

Spring break safety device reliably locks the shaft in case of emergency preventing the door leaf from falling.

A set of mounting hardware, instruction manual and product technical data.

Stylish, elegantly shaped handle makes it easy and convenient to open or close the door.

T-lock blocks the door leaf both from inside and outside the premise.

Latch lock blocks the door leaf from inside the premise. Simple and reliable.

Manual chain operator can be installed to any lift type commercial sectional door and is used for manual opening/closing of the door.

It’s recommended to install corrosion-resistant component parts in case the door is used in high humidity environment to provide secure protection from corrosion and ensure long-lasting durability. These component parts have prolonged service life and include powder-coated springs and tracks, non corrosive side tracks and cables, hinges and door fixtures, powder-coated side caps.

Door panels of aluminium T-bridge profiles (optional) with polyamide thermal insulation enhance energy efficiency and prevent profiles from freezing.

Perforated aluminium sheet may be used instead of glazing acting as an elegant and strong barrier which limits visibility.

Torsion spring mechanism has a lifetime of 100 000 cycles.

The additional external contour of the seal ensures maximum adherence of the web to the seal. The air chamber formed between the seals provides the best sealing, preventing cold from penetrating into the room.

The “thermal package” option involves installing a heat-resistant lower (upper) aluminum profile using T-bridge technology, which avoids heat loss.

Industrial doors can be equipped with openers and safety devices (go to Sectional Door Automatics).

Technical description

Size Table

Opening Dimensions

Construction

Standard Construction

Specifications

Operating Conditions

Packaging

Parameters

Value

Opening height, mm

2 000–6 000

Opening width, mm

2 000–6 100

Headroom, mm

from 150

Sideroom clearance, mm

from 120

Panoramic panel height, mm

370–720

Panoramic panel width, mm

not more than 3 000 mm

Vertical track
Vertical angle
Cylindrical shaft
Spring safety device
Drum
U-shaped bracket
Counterbalancing mechanism (torsion spring)
Steel coupler
Internal support bracket
Top support with roller holder
Side support with roller holder
Hinge
Cable break safety device
Bottom profile
Panoramic panel
Bottom seal
Side seal
Top profile
Top seal
Perforated side cap
Full-vision impact-resistant filling
Spring bumper
Universal mounting bracket for horizontal tracks

Low lift, front mount

Symbol, parameter name	Calculation formula
H, mm Opening height	H
h, mm Headroom height	≥ 230; ≥ 260 (with door operator)
B, mm Opening width	B
A, mm Angle track height	H + 110
Ab, mm Height of shaft axle and drum	≥ A + 59
A1, mm Vertical track height	А - 543
A2, mm Horizontal track height	А - 106
E, mm Horizontal track length	Н + 300
Db, mm Torsion spring operation space	depends on opening dimensions and door leaf weight
S, mm Minimum side room clearance	120
P, mm Door opener position	Н + 1 185
n, mm Clear opening	up to 190 — without door operator; up to 235 — without door operator, with bottom sandwich-panel, opening width more than 4 500 mm; up to 10 — with door operator; up to 70 — with door operator, with bottom sandwich-panel opening width more than 4 500 mm

Low lift, front mount (RKTN)

Symbol, parameter name	Calculation formula
H, mm Opening height	H
h, mm Headroom height	≥ 160
B, mm Opening width	B
A, mm Angle track height	H + 54
Ab, mm Height of shaft axle and drum	≥ A + 59
A1, mm Vertical track height	А - 552
A2, mm Horizontal track height	А - 115
E, mm Horizontal track length	Н + 440
Db, mm Torsion spring operation space	depends on opening dimensions and door leaf weight
S, mm Minimum side room clearance	120
P, mm Door opener position	Н + 1 185
n, mm Clear opening	up to 245 — without door operator; up to 300 — without door operator, with bottom sandwich-panel, opening width more than 4 500 mm; up to 60 — with door operator; up to 125 — with door operator, with bottom sandwich-panel, opening width more than 4 500 mm

Low lift, rear mount

Symbol, parameter name	Calculation formula
H, mm Opening height	H
h, mm Headroom height	≥ 150; ≥ 180 (with door operator)
B, mm Opening width	B
A, mm Angle track height	If h < 170: H + 110; If 150 ≤ h ≤170: H + h - 60
Ab, mm Height of shaft axle and drum	If h ≤ 170: H + 55; If 150 ≤ h ≤ 170: H + h - 47
A1, mm Vertical track height	А - 543
A2, mm Horizontal track height	А - 106
E, mm Horizontal track length	Н + 510
Db, mm Torsion spring operation space	depends on opening dimensions and door leaf weight
S, mm Minimum side room clearance	120
P, mm Door opener position	Н + 1 185
n, mm Clear opening	240 (without door operator); 40...60 (with door operator)

Standard lift

Symbol, parameter name	Calculation formula
H, mm Opening height	H
h, mm Headroom height	R381: ≥ 420; R305: ≥ 350
B, mm Opening width	B
A, mm Angle track height	R381: H + 235; R305: H + 165
Ab, mm Height of shaft axle and drum	A + 97
A1, mm Vertical track height	R381: A — 580; R305: A — 490
A2, mm Horizontal track height	А - 110
E, mm Horizontal track length	R381: H + 200; R305: H + 250
Db, mm Torsion spring operation space	depends on opening dimensions and door leaf weight
S, mm Minimum side room clearance	120
P, mm Door opener position	Н + 1 060
Q, mm Shaft opener position	300

Roof pitch, standard lift

Symbol, parameter name	Calculation formula
H, mm Opening height	H
h, mm Headroom height	> 500
B, mm Opening width	B
A, mm Angle track height	H + 250...985
Ab, mm Height of shaft axle and drum	А + 86/97
A1, mm Vertical track height	Н - 300
E, mm Horizontal track length	depends on α° (dimension that limits door backroom operation space)
Db, mm Torsion spring operation space	depends on opening dimensions and door leaf weight
S, mm Minimum side room clearance	120
α° Angle of the tracks to horizontal	5...65 (divisible by 5°)
Q, mm Shaft opener position	300

High lift

Symbol, parameter name	Calculation formula
H, mm Opening height	H
h, mm Headroom height	≥ 660
B, mm Opening width	B
HL, mm Distance from opening to horizontal tracks level	by default h - 330
A, mm Angle track height	H + HL
Ab, mm Height of shaft axle and drum	A + 86/97
A1, mm Vertical track height	А - 580
A2, mm Horizontal track height	А - 53
E, mm Horizontal track length	H - НL + 470...600
Db, mm Torsion spring operation space	depends on opening dimensions and door leaf weight
S, mm Minimum side room clearance	120
Q, mm Shaft opener position	300

High lift, bottom mount

Symbol, parameter name	Calculation formula
H, mm Opening height	H
h, mm Headroom height	≥1 600
B, mm Opening width	B
HL, mm Distance from opening to horizontal tracks level	1 330 ≤ HL ≤ h - 150
A, mm Angle track height	H + HL
Ab, mm Height of shaft axle and drum	H + 400...600 + 280
A1, mm Vertical track height	А - 580
A2, mm Horizontal track height	А - 53
E, mm Horizontal track length	H - НL + 470...600
Db, mm Torsion spring operation space	depends on opening dimensions and door leaf weight
S, mm Minimum side room clearance	≥ 300
Q, mm Shaft opener position	≥ 500

Roof pitch, high lift

Symbol, parameter name	Calculation formula
H, mm Opening height	H
h, mm Headroom height	≥ 660
B, mm Opening width	B
HL, mm Distance from opening to horizontal tracks level	330
A, mm Angle track height	H + HL + 15...749
Ab, mm Height of shaft axle and drum	≤ А + 86/97
A1, mm Vertical track height	Н + HL - 330...580
E, mm Horizontal track length	depends on α° (dimension that limits door backroom operation space)
Db, mm Torsion spring operation space	depends on opening dimensions and door leaf weight
S, mm Minimum side room clearance	120
α° Angle of the tracks to horizontal	5...65 (divisible by 5°)
Q, mm Shaft opener position	300

Roof pitch, high lift, bottom mount

Symbol, parameter name	Calculation formula
H, mm Opening height	H
h, mm Headroom height	≥ 1600
B, mm Opening width	B
HL, mm Distance from opening to horizontal tracks level	≥ 1 330
A, mm Angle track height	H + HL + 15...749
Ab, mm Height of shaft axle and drum	Ab > H + 680
A1, mm Vertical track height	Н + HL - 330...580
E, mm Horizontal track length	depends on α° (dimension that limits door backroom operation space)
Db, mm Torsion spring operation space	depends on opening dimensions and door leaf weight
S, mm Minimum side room clearance	300 min
α° Angle of the tracks to horizontal	5...65 (divisible by 5°)
Q, mm Shaft opener position	≥ 650

Vertical lift

Symbol, parameter name	Calculation formula
H, mm Opening height	H
h, mm Headroom height	> Н + 500
B, mm Opening width	B
A, mm Angle track height	2H + 120
Ab, mm Height of shaft axle and drum	A + 166
A1, mm Vertical track height	Н
S, mm Minimum side room clearance	120
Q, mm Shaft opener position	300

Vertical lift, bottom mount

Symbol, parameter name	Calculation formula
H, mm Opening height	H
h, mm Headroom height	> H + 120
B, mm Opening width	B
A, mm Angle track height	2H + 120
Ab, mm Height of shaft axle and drum	H + 680
A1, mm Vertical track height	H + 850
S, mm Minimum side room clearance	500 min
Q, mm Shaft opener position	≥ 650

Parameter	Value	Notes
Thermal resistance, m² · °С/W	0,4 (В)	depends on door size
Number of cycles	durability 10 000 (opening/closing) cycles for door and parts; 25 000 cycles for springs
Door leaf weight, kg/m²	14,5	depends on type and size of door panels
Force of manual opening and closing, N	260

Door leaf should smoothly slide vertically along the tracks, and be properly balanced, i. e. counterbalancing mechanism should compensate leaf weight.

For opening the door in manual operation use only the door handle.

Do not lift too much force when opening/closing the door. Prevent any sharp movements of the door.

Keep people and animals clear of opening while door is operated.

Never stay or cross an opening under a moving door leaf as it may cause serious injury or death.

Don’t strike the door leaf or obstruct its movement.

Keep tracks and rollers clean, as dirt may prevent the door from smooth movement and cause overloading and damage of the door operator (if used).

Keep the door opening clear of any objects and litter as it may unbalance and jam the door leaf.

Packing in cardboard	Packaging features
Description	The door leaf and the tracks system are packed in a fibre board and polystyrene combination wrapped in a stretch film.Hardware is packed a box wrapped in a stretch film. All packages are labeled with stickers containing order information and DoorHan logo.
Contents	corrugated fiberboard, polystyrene, stretch-film, adhesive tape
Width, mm	from 500 to 800
Height, mm	from 200 to 800
Length, mm	from 2 100 to 6 200
Gross weight, kg	up to 1 000
Number of items in the packaging	leaf packaging — from 3 to 13 panels; tracks package — 1 track system; hardware — 1 box (or more); extra packages (for framing, delta-profile/struts, etc.)

Additional Information print

Sandwich panels should be stored in producer’s packaging on a flat horizontal surface in warehouses or under a canopy for a period not exceeding 6 months from the production date. Provide proper protection from water, snow, dirt, and direct sunlight.

Installation

Mounting Options

Checking Dimensional Details

Overhead mounting. All the tracks are mounted on the headroom and side rooms inside the premise.

All the necessary measurements are taken inside the premises with just a measuring tape and a water level. Every dimension should be taken at least in three points:
H — opening height (distance from floor to opening top);
B — opening width (distance between left and right side of the opening);
h — headroom (distance between opening top and ceiling) min 150 mm;
b1/ b2 — left/right sideroom (distance between a corresponding opening edge and obstacle) min 120 mm;
L — backroom.
When measuring Н and В the largest figure is taken for final dimension.
When measuring h, b1, b2 and L the smallest figure is taken for final dimension.
Difference of floor level along the opening should not exceed 10 mm. Make sure that mounting surface of headroom and siderooms is level. The inside perimeter of the door opening should be framed with metal or other solid material in case the surface is not concrete or solid enough to install tracks system.

Warranty print

DoorHan warrants to the original purchaser of the product that the sandwich panels and steel profiles of the track system will be free from corrosion for a period of ten years.

New Products

A new system for manufacturing double-glazed panoramic panels based on a unique spacer profile that ensures complete sealing.

New panoramic shield assembly system — single upper and lower profiles. They replace the assembly pair — the upper (lower) profile of the panoramic panel and the upper (lower) profile of the canvas.

The new handle for lifting the door leaf simplifies installation, as it does not require milling and is fastened with self-tapping screws.